MSgpio.com read only forums (Jan.15,2018)

Hello Lance, i use the 7-segment indicator as gear display as decribed in your documentation: http://www.msgpio.com/manuals/mshift/index.html It works well. I have added the decimal point to show lock-up function. However, it is a little too bright for night driving. I would like to know if it is po...

Hello Adicted, In my car, Park and neutral display 0 as Current gear and manual gear. Reverse is -1. So if your current gear shows -1 while in N or D, there might be a problem. To know what gear you have on the shift lever, you should check manual gear. And Current gear will give you the gear chosen...

Hello Lance, I am sorry I did not answer you earlier, I did not had the opportunity to drive the car in the last 2 weeks. I tested it this evening, it seems to be fine: I drove it 10km, tried always to stay around 88km/h, which made the problemm ealier. It did not occur: no down-shift to 3rd, it did...

Hello,
I think Andrew (apt67et10) has such a transmission.

Hello Andrew, look at my settings. It was working last time I checked. I have a pdashboard in Tunerstudio with the VSS from GPIO and from MS3, and current gear from GPIO and MS3, so I can compare both together and check if everything is set correctly. Last time I checked it xas working, but I update...

Hello Shaodome, I also have a 4L80e, I had problems with the OS and IS speed at the beginning, but not as bas as you have. I ended using the dual VR board from Jean to get the right speed. Andrew did the same on his Ford transmission. Now it is OK. I put the board in the MSGPIO casing, using unused ...

Hello Lance, Did you have the opportunity to check for the 88km/h downshift (1800Hz VSS)? the new code you made did ot manage to solve it. I think the modification you made between the 4.129b and 4.129c should solve the problem. It is what solved it last year. Andrew, I turned off the lever error re...

I changed the parameters to see the voltage: 0,0 and 5,5. It was showing 0.1, which now means 1V as it was 10x lower. So maybe it is still OK.
my sensor has an output of 1-6V, between 0 and 40 bar. so at atmospheric pressure, it shows 1V.

Hello Lance, I was also trying to make my line sensor work. Mine needs a 12V supply but I first wired it on the 5V. After that, It did not work (or I thought it did not) Today, I replaced the sensor and tried: it was reading 0V on Tunerstudio again, so I measured the votage on the input of EGT2: it ...

Here is the datalog from the -99 manual gear.