GPIO documentation errors?
Posted: Sat Dec 26, 2015 4:02 am
It seems to me that the connections between PWMx outputs and AMPSEAL pins are not documented here: http://www.msgpio.com/manuals/pwm.htm
It seems the component table on that page also refers to "VBx" circuits rather than PWMx circuits.
I also believe that the AMP pin no's for the VBx outputs are wrong. I recon they should be:
VB1 PE0 (input only) 11
VB2 PA0 12
VB3 PE4 23
VB4 PM2 35
It seems the component table on that page also refers to "VBx" circuits rather than PWMx circuits.
I also believe that the AMP pin no's for the VBx outputs are wrong. I recon they should be:
VB1 PE0 (input only) 11
VB2 PA0 12
VB3 PE4 23
VB4 PM2 35