Ms3pro mpdule and GPIO trans control
Ms3pro mpdule and GPIO trans control
I have the Ms3pro manual and have gone through most of the gpio 4l60e stuff. But i wanted to confirm that the GPIO canbus will work with the ms3pro module, as the ms3pro manual says microsquirt trans control via canbus and doesnt list the GPIO as an option. Does it mean it wont communicate with the ms3pro and ill need to run it stand alone?
Would It be a better match if I bought a microsquirt for trans control?
OI really like that the GPIO has a stim pack and I have not seen a stim pack for the microquirt trans setup.
Just gonna be bench testing a bit for a while before actually putting it to an engine so I really need the stim pack capabilities : /
Thanks for your help!!!
-
- Posts: 1696
- Joined: Fri Apr 04, 2008 1:28 pm
Re: Ms3pro mpdule and GPIO trans control
I believe there are a few people using ms3pro with MShift/GPIO. Perhaps some will chime in here. You can also do a search on this forum for "ms3pro" and you'll see some of them. Of course we tend to hear from people who have had issues, so there may be many more ms3 users out there.
-
- Posts: 55
- Joined: Thu Apr 17, 2008 5:19 am