Search found 42 matches

by Ap67et10
Tue Jun 03, 2014 1:13 pm
Forum: MegaShift Transmission Application
Topic: manual shift options?
Replies: 5
Views: 8449

Re: manual shift options?

Yes you are correct. I found that it was not behaving correctly for other reasons. I got those sorted out and now it seems to be working as I would expect. I've had a few kinks I've been sorting out on my setup, and those kinks have had some unwanted/unexpected results. The way the manual gear selec...
by Ap67et10
Mon Jun 02, 2014 8:35 am
Forum: MegaShift Transmission Application
Topic: transmission temp calibration
Replies: 3
Views: 5114

Re: transmission temp calibration

yes that is exactly what I did and it works great now. Obviously there is no reason for me to re-calibrate it anymore (unless I load firmware again which then I'll just do it while I'm connected over serial) I just wanted to bring it to light, as I wasn't sure if this was what it should be doing or ...
by Ap67et10
Mon Jun 02, 2014 7:46 am
Forum: MegaShift Transmission Application
Topic: transmission temp calibration
Replies: 3
Views: 5114

Re: transmission temp calibration

Lance, I sent a message to Phil and they had mentioned some of the issues on why GPIO probably would not be able to calibrate over CAN pass-through. It occurred to me that maybe I was not clear that was how I was trying to calibrate it over CAN and then I wondered if I had missed any info in the doc...
by Ap67et10
Sun Jun 01, 2014 9:58 pm
Forum: MegaShift Transmission Application
Topic: manual shift options?
Replies: 5
Views: 8449

Re: manual shift options?

You could maybe use 2 different shift table, one standard in O/D mode. And with the O/D mode disabled, put target gear =4 everywhere, so the transmission will shift to the higher gear available: the one allowed by the lever. yes I plan to use the O/D button to activate two different tables, one ver...
by Ap67et10
Sun Jun 01, 2014 9:53 pm
Forum: MegaShift Transmission Application
Topic: manual shift options?
Replies: 5
Views: 8449

Re: manual shift options?

I posted this in my other thread....I have found a way to have quite a few. Anyways, I loaded new firmware and found the manual shifting is functioning more like I expected however I found an issue I began having. When accelerating I had let off the throttle some as I shifted from 1st to 2nd, then I...
by Ap67et10
Sun Jun 01, 2014 9:39 pm
Forum: MegaShift Transmission Application
Topic: 1st gear issues with 5.015
Replies: 9
Views: 10290

Re: 1st gear issues with 5.015

I originally did use your msq, but now I have a bunch of different reload msq's that I had built from scratch because it seemed better since I had a few issues I was trying to sort out. I wanted to make sure nothing was getting corrupted as Lance had suggested. What ended up letting go on the transm...
by Ap67et10
Sun Jun 01, 2014 9:32 pm
Forum: MegaShift Transmission Application
Topic: transmission temp calibration
Replies: 3
Views: 5114

transmission temp calibration

Ok, so I was having an issue where every time I tried to calibrate the transmission temperature sensor it would just change the coolant temp in tuner studios. I had an issue where I ended up reloading firmware again, and while doing that via serial port on GPIO I realized I should try to calibrate t...
by Ap67et10
Sat May 31, 2014 9:22 pm
Forum: MegaShift Transmission Application
Topic: 1st gear issues with 5.015
Replies: 9
Views: 10290

Re: 1st gear issues with 5.015

unfortunately i blew my trans sky high this time and replaced it with a tko600, i guess a turboed 4.6dohc with a 4r70w just wasnt meant to be, it has been out 5 times and don't think i had more that 3000 miles on it. oh well i can still use the gpio in a friend car its just a measly 5.3 he wants to...
by Ap67et10
Sat May 31, 2014 9:18 pm
Forum: MegaShift Transmission Application
Topic: 1st gear issues with 5.015
Replies: 9
Views: 10290

Re: 1st gear issues with 5.015

It wasn't about not having engine braking in D, it was about not feeling it downshift and when getting back into the gas it did nothing. The truck just felt like I had tossed it in neutral until I would rev up a bunch and it would all the sudden clunk into gear and shift up to 2nd or 3rd. However I ...
by Ap67et10
Fri May 30, 2014 11:32 am
Forum: MegaShift Transmission Application
Topic: 1st gear issues with 5.015
Replies: 9
Views: 10290

Re: 1st gear issues with 5.015

So the problems were getting worse and worse with this thing yesterday. I was trying to log it again last night on my drive home and I kept loosing coms and all kinds a weird crap. kept randomly not shifting and 1st gear wasn't ever doing what it should and neither were the other gears. I figured th...