Search found 72 matches

by mill3833
Tue May 13, 2014 7:11 pm
Forum: TunerStudioMS
Topic: MS3 with CAN pass-thru issues
Replies: 19
Views: 47701

Re: MS3 with CAN pass-thru issues

Lance, Just to clarify, I have not updated MS3Pro, ever. Was thinking about it, but then ran into these com issues. And its been down hill from there. The only input TS is reporting as a reasonable value is trans fluid temp, as it slowly returns to ambient as I'm left in utter frustration. Not even ...
by mill3833
Tue May 13, 2014 5:59 pm
Forum: TunerStudioMS
Topic: status 65 and loss of MSShift CAN
Replies: 1
Views: 13275

status 65 and loss of MSShift CAN

Ok Lance, I am confused. After trying to troubleshoot other issues, I've really goofed something up. See attached screen shot. After powering up the system, using Bluetooth, I comms working (according to the blinking lights in the lower right hand corner). But when I go to my MSShift screen, TPS loa...
by mill3833
Tue May 13, 2014 4:33 pm
Forum: TunerStudioMS
Topic: MS3 with CAN pass-thru issues
Replies: 19
Views: 47701

MS3 with CAN pass-thru issues

These work with BT jsut fine, but MSShift CAN via USB issue affects: 4144 4143 4142 4141f 4141 4138t 4135 I then tried 5012. It too didn't work. But then I tried power-cycling the system, including TS, when it powered up, with USB, it registered another diff report, so, so send TS to MSShift, and th...
by mill3833
Tue May 13, 2014 3:11 pm
Forum: TunerStudioMS
Topic: MS3 with CAN pass-thru issues
Replies: 19
Views: 47701

MS3 with CAN pass-thru issues

Here's something else that's curious... Was going to investigate updating my MS3Pro SW, and figure I should do this with the wired-USB connection. But lately it has been un reliable. So have been using BT. So just now, I connected up the USB (converter part of MS3Pro unit) and what happens (also did...
by mill3833
Tue May 13, 2014 2:52 pm
Forum: MegaShift Transmission Application
Topic: 2nd Gear Start option?
Replies: 17
Views: 18940

Re: 2nd Gear Start option?

Hi Lance, Here's the 4144 "Burnout Mode" garage test, report #1. Its raining here (May in Indy...) so I have the car on jack stands in the garage. First off, integration between MSShift and TS is pretty neat. I'm impressed you can make this type of functionality update to the system with j...
by mill3833
Mon May 12, 2014 7:04 pm
Forum: MegaShift Transmission Application
Topic: 2nd Gear Start option?
Replies: 17
Views: 18940

Re: 2nd Gear Start option?

Lance, Great! I'll give it a try tomorrow. Is a new ini needed? Just to clarify, with this new feature on, and Lever in D2, then mGear = tGear =cGear =2, right? And it won't upshift to 3rd gear, regardless of engine rpm, right? This is what I'd expect. ie, If I get distracted in the water box by a s...
by mill3833
Mon May 12, 2014 6:32 pm
Forum: MegaShift Transmission Application
Topic: Shift Target sets to -99 sometimes
Replies: 21
Views: 22817

Re: Shift Target sets to -99 sometimes

Lance, I tried 4143 this evening. With Lever Error reporting "on", it still sets error when shifter is moved quickly from D3 to D1. It set on the first try, same as previous versions. To help troubleshoot, I took TS data, connected straight to MSShift via serial, in an attempt to get highe...
by mill3833
Fri May 09, 2014 6:46 pm
Forum: MegaShift Transmission Application
Topic: Shift Target sets to -99 sometimes
Replies: 21
Views: 22817

Re: Shift Target sets to -99 sometimes

No rush. This "bug", if you want to call it that, really doesn't appear to have any functional effect as long as error reporting is off. But you know the code, so I'll let you be the judge of that. I feel safe driving it. Am slowly working up to WOT shifts, am tuning the VE table etc. So w...
by mill3833
Fri May 09, 2014 5:47 pm
Forum: MegaShift Transmission Application
Topic: Shift Target sets to -99 sometimes
Replies: 21
Views: 22817

Re: Shift Target sets to -99 sometimes

Well, slapping is just a way to get the fault to set. :) This is a floor shifter car, sometimes when shifting from R to D, you over shoot D3 and land in D2 or D1. I do not get the fault if the lever is moved more deliberately. This car never had "paddle shifter" buttons and I'm personally ...
by mill3833
Fri May 09, 2014 4:02 pm
Forum: MegaShift Transmission Application
Topic: Shift Target sets to -99 sometimes
Replies: 21
Views: 22817

Re: Shift Target sets to -99 sometimes

Just tried 4142 in the garage, up in jack stands. No joy.

A quick slap from M3 to M1, and error 33 sets as does mGear= -99. This is with Report Lever Errors = T. If I set it to Ignore Lever Errors, then it resets and works. Found that out a couple of versions ago.

Log attached.

Dave