MSgpio.com read only forums (Jan.15,2018)

Good to hear

looks dead... nothing from anyone, Lance or B&G .....

Lets hope that this is not the end...

If it is they should at least let us know.....

//Tobmag

Cant see any post or sign of life from Lance,,,

Is this now the end of the development of the code?

Hi Sheriff

Time for the annual update

BR//

Hi.

No I didnt look around for any more info, probably you can ask at any BMW or Audi community/forum.



BR//Tobmag

I did look at this for a while but dropped it since the most common ones (BMW etc) cant handle that much power unless you find one from a RR or Bently....but you can then imagen the price

Na, I'm staing with my 4L80E since its quite cheap to get it to handle to 1000hp


BR//Tobmag

Phil.

If the circuit you are using is producing a 12v square wave signal, just bring it down to 5volt and bypass the on-board VR conditioner
and connect it directly to the processor pin at the header.

This is what I and many others have done to solve this issue.

Some reading for you here ...

Phil.

Long time no seen :D

I have been in the same place as you are right now and many otheres with me.

What you should be looking at is actualy the signal AFTER the VR conditioner going into the processor pin.
Its easily accesible on the header.

I assume you have alot of logs so look at them ...

Addicted,

No need to build a new GPIO there is plenty of space inside the box for an additional pcb.
Ill try to remember to post a pic of the inside of my box.

Or are you talking about the loom?


BR//Tobbe