Search found 8 matches

by superdve
Mon Jul 03, 2017 11:24 am
Forum: MegaShift Transmission Application
Topic: AA80E 8-speed
Replies: 297
Views: 485283

Re: AA80E 8-speed

It's hard to break new ground or even travel ground not well travelled. My A340E is oh so close to working right in my Scamp. It would be nice to get the CAN messaging working right so I could get IDLE UP to work with my tight converter. Alas, probably go 4L80E and some other controls if I can't get...
by superdve
Wed Jun 28, 2017 5:48 am
Forum: MegaShift Transmission Application
Topic: MS3 1.4.X CAN OFFSET on 4.146
Replies: 10
Views: 52703

Re: MS3 1.4.X CAN OFFSET on 4.146

In case I didn't mention this. I have the trans shifting really nicely on 4.146 and once I added a PWM for the backfill accumulator solenoid the part throttle and garage shifts were much nicer. The converter is tight and it would be nice to be able to idle up when I transition from P to R and P to D...
by superdve
Mon Jun 26, 2017 4:00 am
Forum: MegaShift Transmission Application
Topic: MS3 1.4.X CAN OFFSET on 4.146
Replies: 10
Views: 52703

Re: MS3 1.4.X CAN OFFSET on 4.146

I tried the new code and it shifted horrible, (a bunch of changes between 4.146) but that code also didn't idle up or adjust timing. I think this has much more to do with the proper CAN address offsets than a general error in the code. I was thinking to try James Murray's code but James' code won't ...
by superdve
Fri Jun 23, 2017 1:17 pm
Forum: MegaShift Transmission Application
Topic: MS3 1.4.X CAN OFFSET on 4.146
Replies: 10
Views: 52703

Re: MS3 1.4.X CAN OFFSET on 4.146

That's awesome. I will bench flash it with the new firmware if you are happy with it. It's a 71' Mopar with a 2JZGTE and A340E...it can use shift spark retard. Can you share your CAN settings with me? Right now I have to grab "all vars" to get TPS/RPM to pass between the MS3pro and and GPI...
by superdve
Fri Jun 23, 2017 12:22 pm
Forum: MegaShift Transmission Application
Topic: MS3 1.4.X CAN OFFSET on 4.146
Replies: 10
Views: 52703

Re: MS3 1.4.X CAN OFFSET on 4.146

Can you enable shift spark retard and idle step up on 5202?
by superdve
Fri Jun 23, 2017 12:21 pm
Forum: MegaShift Transmission Application
Topic: MS3 1.4.X CAN OFFSET on 4.146
Replies: 10
Views: 52703

Re: MS3 1.4.X CAN OFFSET on 4.146

I have thought about it, but I'm worried that I might be running some hybrid 4.146 that Lance developed for me...
by superdve
Tue Jun 20, 2017 2:44 pm
Forum: MegaShift Transmission Application
Topic: MS3 1.4.X CAN OFFSET on 4.146
Replies: 10
Views: 52703

MS3 1.4.X CAN OFFSET on 4.146

I'm trying to get idle up and spark to work on 4.146, I've tried all the usual offsets 512/630 and it looks like James Murray says 1144 is correct now. Anyone have this working? My 2JZ needs it. FWIW, I went in and edited the .ini to allow an input past 1024, not sure if that will do it or not! -Dav...
by superdve
Mon May 05, 2014 7:44 am
Forum: MegaShift Transmission Application
Topic: microTCU
Replies: 45
Views: 159828

Re: microTCU

Hi Guys!! Waiting in absolute anticipation!!! Just would like to inquire... The outputs controlling the solenoids, will they all be Switched ground (Low Side) or will there be an option of having Switched Supply (High Side) outputs (as for the Toyota A34 type Tranny's and I am sure on a few others)...