MSgpio.com read only forums (Jan.15,2018)

Lance,

Did you ever make any progress on finding an alternative to timing retard for turbo app's?

Having the boost spike during a shift is not the best for the trans. I tore up a full billet built 4l70 last year. 4L80e going in soon.

Lance,

How can I get the vehicle speed sent over the CAN-Bus into the MS2 and then out the MS2 serial port in order to datalog speed along with the engine parameters?

Marc

The GPIO hardware has the right inputs and outputs to do the job what is missing is the control s/w to get the job done. From my perspective in general the MS project could use more embedded programmers to make things like this happen. One problem is embedded programmers are a rare bunch, most s/w s...

Retarding the timing works fine in a NA application, but may be counter-productive in a turbo app. Typically when the timing is retarded the boost increases.

I'd like to help further, we're weather limited until March - 20" of snow and -10 to -30* has curtailed operations..

See below.. Marc, Thanks, that's good info. I still need to sort out the logic for the LU Feel. Things like: - is the LUF solenoid on at all times, or is it active only when the torque converter is locking? If so, how does the ECU know how long it takes to lock the converter (for example, does it ha...

Lance,

This is going to vary with the transfer case design. The one transfer case I have data on, low range is 2.69:1 reduction. You'll need to make this a setable value via MT.

Marc

Lance, I've talked to some good transmission guys, the PWM 3-2 valve on the early transmissions can be updated to the later on/off if the valve body separator plate is upgraded to a trans go part see this web page for details... http://www.transgo.com/separatorplate.php <<<< I've used these plates w...